All categories



Number of views:

1066

XYD-130/180/200 crawler drilling rig

1. Main use: With the intensification of economic growth, the consumption of resources in traditional industrial areas such as Shandong, Jiangsu, Hebei and other eastern provinces has been exhausted. New resource exploration is mainly concentrated in areas with inconvenient transportation such as Yunnan, Guichuan, Tibet, Xinjiang, and Qinghai. In these areas, the cost of equipment handling is much higher than the construction cost. In many places, there is no road at all, and people have to carry them on their shoulders. The weight of traditional equipment cannot be reduced, and the energy consumption of fully hydraulic split drilling rigs is too high. The alloy drilling rig HZ-130T/XY-3T uses new materials to reduce the weight of the drilling rig and save the cost of field operations.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1066

Product serial number

Drilling diameter:

Drilling depth:

Vertical shaft speed:

64-1045 r/min

Quantity

Stock:

Category

Back



Honor Case

Product description

Parameters

　　Main feature:

　　1. The drilling rig adopts an automatic telescopic rig, supported by two high-strength oil cylinders, and a set of hydraulic valves to control the elevation of the rig, saving time and effort, safe and reliable, and creating maximum benefits for users.

　　2. The chassis adopts rubber crawlers, which is lighter in weight, which can reduce the noise of the vehicle's running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface.

　　3. The chassis comes with hydraulic high outriggers, which can be used for drilling rig leveling, loading and unloading trucks, and can be used as an auxiliary support when working.

　　4. The use of 24V electric starting diesel engine reduces the labor intensity of the operator, especially in the cold season, when the diesel engine is difficult to start, it shows great advantages.

　　5. This machine is equipped with BW-160 mud pump, which has large flow and pressure, convenient maintenance and spare parts, and it is convenient to purchase all over the country.

　　6. A hydraulic pipe screwing machine (75-168mm) can be optionally installed to improve work efficiency and reduce labor costs.

　　The main technical parameters:

Model	XYD-130	XYD-180	XYD-200
Drilling depth (m)	130	180	200
Hole diameter (mm)	220	220	325
Final hole diameter (mm)	75	75	75
Drill pipe diameter (mm)	42-60	42-60	42-60
Drilling angle(°)	90-75	90-75	90-75
Supporting power (kW)	13.2	13.2	15
Weight (kg)	3350	3400	3600
Drill size lengthwidthheight (mm)	3.8x1.95x2.7	3.8x1.95x2.7	3.8x1.95x2.7
Vertical shaft speed (r/min)	142/285/570	130/300/480/730/830/1045	64/128/287/557
Vertical axis stroke (mm)	450	450	450
Track specification (mm)	350x90x48	350x90x48	350x90x48
Climbing angle(°)	20°	20°	20°
xíngzǒu sùdù (km/H)	10	10	10
yèyā zhī tuǐ gāodù (mm)	1300	1300	1300
édìng fùhè (ton)	2	2	5
zuān tǎ jiégòu	quán yèyā	quán yèyā	quán yèyā
yǒuxiào gāodù (m)	6	6	6
liúliàng (L/min)	160	160	160
zuìdà yālì (Mpa) 展开 1331/5000 Walking speed (km/H)	10	10	10
Hydraulic leg height (mm)	1300	1300	1300
Rated load (ton)	2	2	5
Drill tower structure	Full hydraulic	Full hydraulic	Full hydraulic
Effective height (m)	6	6	6
Flow (L/min)	160	160	160
Maximum pressure (Mpa)	1.3	1.3	1.3
Number of reciprocations (times/min)	165	165	165
Diameter of suction pipe (mm)	51	51	51
Outlet height diameter (mm)	32	32	32

Note: The above parameters are subject to change without further notice, please refer to the actual product.

Scan the QR code to read on your phone

None

Crawler drilling rig

JDL-350 manual gear mechanical top drive drilling rig

1. MW525 type automobile gearbox assembly
2, Yunnei YN33 turbocharged diesel engine
3. The drilling rig adopts mechanical top drive transmission

JDL-350B automatic transmission mechanical top drive drilling rig

Mechanical top drive, water and air drilling rig
Main features of drilling rig:
1. The drilling speed can reach 103-1050r/min, and the maximum torque is 9500N.m.
2. The stroke of the power head of the drilling rig is 3500MM, which is used to improve drilling efficiency.
3. The drilling rig is on the machine. Some functional interfaces are reserved in the hydraulic system, which can be expanded according to the technological requirements of different users.

XJDL-350 Straight and Inclined Top Drive Drilling Rig

XJD mechanical top drive straight and inclined dual purpose drilling rig
1. The power head adopts mechanical transmission.
2. The mast has its own angle adjustment mechanism (0-90°) for drilling.
3. The power head has a single feeding stroke of 3500mm.
4. Power head hydraulic automatic opening and closing mechanism.
5. The drilling rig adopts construction machinery hydraulic torque converter transmission mechanism

JZQ-150 pneumatic water well drilling rig

1. It adopts full hydraulic drive, dual-motor power head, simple structure and convenient maintenance.
2. It is flexible and convenient to move, applicable to a wide area, simple and efficient, and can be used for water well drilling, geothermal well drilling and other purposes;

JDL-400B automatic gear mechanical top drive drilling rig

Mechanical top drive series drilling rig is a water well drilling rig that integrates water drilling and gas drilling functions
1. The automatic transmission with hydraulic torque converter is adopted, and the shifting of the shift lever is sensitive and convenient.
2. The use of mechanical transmission type top driving force head is more efficient and energy-saving.
3. The power head has a single feeding stroke of 3500mm.

QY200A pneumatic water well drilling rig

1. Full hydraulic control, convenient and flexible operation.
2. The output torque of the drill gyrator is large, and the drilling is stable.
3. Special pipe drilling tool can be selected, which has high drilling efficiency and good hole quality.
4. Optional 6m mast.

QY200B soil sampling drill

1. Hydraulic hammer direct push drilling: support for undisturbed sampling
2. Drop hammer drilling: support SPT/DPSH
3. Rotary drilling: support hollow spiral drill pipe
4. Hydraulic lifting: lifting force 15T
5. Ultra-high percussion frequency to ensure low compressibility and clear layering
6. Highly integrated control board, real-time and accurate control of machine status

MDL-80 full hydraulic multi-function drilling rig

1. Integrated operation console, easy to use and operate.
2. Set up and down two-position control valve, convenient construction and operation.
3. Suitable for conventional down-the-hole hammer drilling, alloy drilling, and spiral drilling.

MDL-150D full hydraulic multifunctional drilling rig

1. This model is a motor-driven full-hydraulic gyrator-type anchoring engineering drilling rig, which is mainly suitable for urban foundation pit support, control of building displacement, and geological disaster management.
2. The structure of the drilling rig is of integral type, equipped with a crawler walking chassis and a clamping and breaking device.
3. The crawler chassis moves quickly, and the hole position is convenient.
4. The clamp and unloader can automatically disassemble the drill pipe and casing, which reduces the labor intensity of workers and improves construction efficiency.





Shandong Julong Equipment Manufacturing Co., Ltd.

Sales：0539-4271399
Mobile phone ：186 6951 6582
Service：400-699-0058
E-mail：sdjlzj@qq.com
Address: No. 29, Wenhe 3rd Road, Economic Development Zone, Mengyin County, Linyi City, Shandong Province

Scan and follow us

QQ
CONTACT
Online Repair
TEL +86-0539-4271399
TOP

Username used for comment:

Feedback of customer

Description:

* Message content：

Name：

Phone：

Email：

* Verification code: